In this section of our catalogue you will find all of our core materials. Materials in this section are used to create a lightweight core in the middle of a laminate to increase its stiffness whilst adding minimum weight to the component. Our range includes honeycomb core materials such as Nomex and aluminium, along with a range of foams, mats and balsa.
Lantor Soric SF is a very popular core material for resin infused laminates.
Soric's honeycomb core structure does not collapse under vacuum and allows resin to flow freely through the material.
Lantor coremat is a traditional coremat or bulking mat used to quickly build up thickness in basic fibreglass moulds and components.
The roll is 1m wide. Available in 1.4mm, 3mm and 5mm thickness. Sold by the linear metre.
In this section of our catalogue you will find all of our core materials. Materials in this section are used to create a lightweight core in the middle of a laminate to increase its stiffness whilst adding minimum weight to the component. Our range includes honeycomb core materials such as Nomex and aluminium, along with a range of foams, mats and balsa.
75kg/m3 density closed cell PMI Rohacell® structural foam available in 3mm, 5mm, 10mm and 20mm thicknesses.
Choice of sheet sizes. High-performance core material particularly suited to prepreg processing.
32kg/m3 density closed cell PMI Rohacell® structural foam available in 2mm, 3mm, 5mm and 10mm thicknesses.
Choice of sheet sizes. High-performance core material particularly suited to prepreg processing.
3D Core is a conformable, flexible core material made from a pattern of interconnected PET foam hexagons.
Sheet sizes are 960mm x 360mm. Available in 3mm, 5mm and 10mm thicknesses.
EasyCell 75 is a closed cell, cross-linked PVC foam core with a nominal density of 75kg/m³.
Available in 3mm, 5mm, 10mm and 25mm thickness in a choice of sheet sizes.
Drilled and grooved version of our EasyCell 75 foam core material allows this foam core.
Available in 10mm and 25mm thickness, in a range of sheet sizes.
In this section of our catalogue you will find all of our core materials. Materials in this section are used to create a lightweight core in the middle of a laminate to increase its stiffness whilst adding minimum weight to the component. Our range includes honeycomb core materials such as Nomex and aluminium, along with a range of foams, mats and balsa.
High quality end-grain balsa for use as a high-performance core material in composite sandwich panels and cored mouldings.
Sheet size is 1220mm x 610mm (4' x 2'). Available in 6.4mm (1/4") and 9.5mm (3/8") thickness.
In this section of our catalogue you will find all of our core materials. Materials in this section are used to create a lightweight core in the middle of a laminate to increase its stiffness whilst adding minimum weight to the component. Our range includes honeycomb core materials such as Nomex and aluminium, along with a range of foams, mats and balsa.
Aluminium honeycomb core material in a low 28.8kg/m3 density with large 3/4" sized cells
10mm, 20mm and 30mm thicknesses and full sheet sizes of 2500mm x 1250mm or quarter sheets of 1250mm x 652mm.
Honeycomb has a 83kg/m3 density and medium 1/4" cells.
Available in 10mm, 15mm and 20mm thicknesses in full sheet sizes of 2500mm x 1250mm or quarter sheets of 1250mm x 652mm.
Honeycomb has a 76.9kg/m3 density and small 1/8" cells.
Available in 10mm, 15mm and 20mm thicknesses in full sheet sizes of 2500mm x 1250mm or quarter sheets of 1250mm x 652mm.
This super-low density core material weighs just 29kg/m³ and is used as a core material in ultra-light sandwich panels
Available in 2mm and 3mm thickness in a range of sheet sizes.
This low density, high compressive strength core material weighs just 48kg/m³ and is used as a core material in lightweight sandwich panels and moulded components.
Available in 5mm and 10mm thickness in a range of sheet sizes.