In this section of our catalogue you will find all of our products relating to vacuum technology including vacuum degassing and casting equipment, vacuum bagging equipment and vacuum bagging consumables and supplies.
These brass vacuum hose-tail connectors, also known as a barb connectors, have a push-fit tail used to connect vacuum hose to a range of equipment.
Available with a 1/4" BSPT (R) thread to suit 6mm, 8mm, 10mm and 12mm ID hoses and with a 1/2" BSPT (R) thread to suit a 12mm ID hose.
6mm ID (internal diameter) clear PVC vacuum hose for general use in composites vacuum bagging and resin infusion.
This low-cost hose is ideal resin lines and vacuum lines in resin infusion where resin will cure in the hose meaning it cannot be reused.
VPO1 is a specially formulated composites vacuum pump oil compatible with many compact dual-stage rotary vane vacuum pumps such as our VP425, JAVAC pumps and more.
this oil is not recommended for our DVP pumps which should use our VPO32 oil instead.
1/4 turn vacuum valve used for opening and closing the vacuum supply from the vacuum pump or to individual vacuum bags.
Female-female 1/4" BSP thread.
Available to buy as a replacement item/spare part.
This is the black silicone seal used on our DC26 vacuum degassing chamber.
This simple but effective indicator will be spun by all but the tiniest leak in a vacuum bag; speeding up bagging and alerting to new leaks if and when they occur.
The leak flow indicator is used in-line between the vacuum pump and vacuum bag. Includes barb connections that will accommodate 6mm and 8mm ID hose.
Medium sized, low cost, contaminant-free paper mixing cups ideal for mixing smaller quantities of resins, gelcoats, silicones and more.
These large disposable cups have a 470ml / 16oz capacity and are also the size used to line our CP1 resin infusion catch-pot.
Reusable silicone connector designed specifically for the resin infusion process.
The connector sits inside the vacuum bag and accepts a 9mm OD vacuum hose and has a slot underneath to feed into the resin infusion spiral.
A resin infusion catch-pot acts as a resin trap and sits between the vacuum pump and the infusion project to prevent resin accidentally being drawn into the vacuum pump.
It includes a high quality glycerine filled vacuum gauge, is easy-to-use, built-to-last and extremely reliable.
Specially made steel spring intended to line our 8mm ID Silicone Vacuum Hose, making it suitable for high pressure autoclave use or to turn it into a virtually uncrushable vacuum hose for general use.
Sold in a 5m coil.
In this section of our catalogue you will find all of our products relating to vacuum technology including vacuum degassing and casting equipment, vacuum bagging equipment and vacuum bagging consumables and supplies.
6mm ID (internal diameter) clear PVC vacuum hose for general use in composites vacuum bagging and resin infusion.
This low-cost hose is ideal resin lines and vacuum lines in resin infusion where resin will cure in the hose meaning it cannot be reused.
Medium flow plastic infusion spiral used to distribute resin flow in vacuum resin infusion of composite parts.
4.5mm OD (3mm ID) designed to be a perfect fit in the base of our resin infusion connectors.
High-temperature, general purpose pressure sensitive PET tape with silicone adhesive.
This versatile, easy to remove tape can be used for a wide range of applications in composites including taping mould halves to prevent flash, blanking off holes/details, creating non-stick barriers and holding consumables in place.
1.52m (60") wide.
Available to buy online in a 5lm folded pack, by the linear metre or in full 100lm rolls.
VB200 is an aerospace-grade multilayer mono-nylon vacuum bagging film suitable for use at temperatures up to 204°C.
It is recommended for high temperature/pressure applications including aerospace and F1 composites.
FM105 'EasyFlow' is a stretchy, drapable, knitted infusion mesh designed specifically as a flow media for more complex mould shapes.
EasyFlow will conform over contoured mould surfaces and into tight corners whilst still maintaining excellent resin flow.
PP180 is a low-cost, general purpose 85gsm white polyester peel ply with black tracer suitable for use at temperatures up to 180°C.
Suitable for resin infusion, vacuum bagging and wet-lay applications using a range of resin systems including epoxy, polyester and vinylester.
Butyl sealant tape used for sealing vacuum bags and sealing hoses and connectors to vacuum bags.
Suitable for use at room temperature or elevated temperatures up to 150°C.
In this section of our catalogue you will find all of our products relating to vacuum technology including vacuum degassing and casting equipment, vacuum bagging equipment and vacuum bagging consumables and supplies.
TBC2 is a high quality through-bag connector (breach unit) used to make a secure, reliable connection between a vacuum bag and the vacuum pump/supply.
TBC2 is completely reusable and built-to-last. It is suitable for all methods of vacuum bagging, including prepregs and is suitable for high temperature and autoclave use.
EC4 is rated for continuous operation, runs quietly, and emits no oil vapour.
220/240V operation only. Please choose the correct power lead for your region.
OV301 is a fully featured industrial curing oven for convenient bench-top installation. It is designed for the precision curing of prepreg moulds and components, casting resins, silicones and more.
The oven includes an intuitive touch screen controller with onboard datalogging, additional auxiliary temperature sensor input and an automated vacuum pump control connection.
In this section of our catalogue you will find all of our products relating to vacuum technology including vacuum degassing and casting equipment, vacuum bagging equipment and vacuum bagging consumables and supplies.