In this section of our catalogue you will find most of our 'liquid' products, including resins, gelcoats, silicones and adhesives. Our range includes resins for a wide range of applications including laminating, infusion, casting and coating as well as silicones suitable for making moulds and components and engineering adhesives for structural assembly.
VM100 is our 'go-to' choice for bonding/assembly of carbon fibre parts and the bonding of metal inserts to carbon fibre or fibreglass laminates.
Available to buy online in a 25ml syringe, 50ml twin cartridge or 400ml twin cartridge.
ET500 is a fast curing, clear, rigid two-part engineering grade epoxy structural adhesive.
5min cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener). Available to buy online in 50ml and 400ml cartridges.
ET515 is a fast curing, clear, semi-flexible two-part engineering grade epoxy adhesive.
15min cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener). Available to buy online in 50ml and 400ml cartridges.
ET538's high viscosity makes it ideal for hand assembly of aluminium and Nomex honeycomb core laminates.
24hr cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener). Available to buy online in 50ml and 400ml cartridges.
PT326 is a two-part, rigid cure, engineering-grade polyurethane (PU) structural adhesive which offers excellent bond strength
20min initial cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener). Available to buy online in 50ml and 400ml cartridges.
PU18 is an excellent all-purpose, black, one-part flexible polyurethane adhesive/sealant.
PU18 is a great choice for demanding bonding applications requiring an amount of gap-filling, and especially where components will be subject to shake or vibration.
FusionFix GP is a non-contaminating, general purpose spray adhesive for use in composites, especially vacuum resin infusion.
Thermoplastic-based and rubber-free, FusionFix GP will not contaminate the laminate or affect interlaminar shear strength.
Type 1 or A-system static mixer nozzle for 50ml and 25ml VuduGlu adhesive cartridges, as well as some other 2-part adhesive cartridges.
NOT compatible with Permabond adhesive cartridges. Sold individually, volume discounts apply.
50ml twin cartridge dispenser gun suitable for all our 50ml Permabond and VuduGlu adhesive packs, as well as most other 50ml 1:1 twin-tube adhesive cartridges.
Normally used together with disposable static mixer nozzles, sold separately.
High quality, metal framed 400ml twin cartridge dispenser gun suitable for all our 400ml
Normally used together with disposable static mixer nozzles, sold separately.
In this section of our catalogue you will find most of our 'liquid' products, including resins, gelcoats, silicones and adhesives. Our range includes resins for a wide range of applications including laminating, infusion, casting and coating as well as silicones suitable for making moulds and components and engineering adhesives for structural assembly.
Vac Cast is an aluminium filled epoxy casting resin designed specifically for the production of high quality vacuum forming tools.
Sold as a kit (resin and hardener). Available to buy online in 5.3kg and 10.6kg kits.
AT30 is the hardener used in our EL2 laminating epoxy and our IN2 infusion epoxy.
AT30 is listed here and available to buy separately where replacement hardener or a different hardener speed is required.
EL2 is a high performance epoxy laminating resin suitable for hand-layup of reinforcements such as carbon fibre, aramid and glass fibre. Its combination of mechanical performance
Sold as a kit (resin and hardener). Available to buy online with a choice of FAST or SLOW hardener in 500g, 1kg, 5kg and 32.5kg kits.
EG60 is a thick, brush-applied epoxy tooling gelcoat for use as a surface coat when making epoxy based composite moulds/tools.
Once cured, EG60 is hard-wearing, chemical resistant and a suitable tool surface for the production of epoxy-based parts.
Uni-Mould Tooling Resin is a low shrinkage filled polyester laminating for composite moulds and tools.
This special filled tooling resin should be used as part of the Uni-Mould rapid tooling system.
In this section of our catalogue you will find most of our 'liquid' products, including resins, gelcoats, silicones and adhesives. Our range includes resins for a wide range of applications including laminating, infusion, casting and coating as well as silicones suitable for making moulds and components and engineering adhesives for structural assembly.
AS40 is a professional quality addition cure (also known as platinum cure) RTV silicone rubber suitable for the production of silicone moulds and silicone mouldings/components.
It cures translucent to a 40 shore A (medium flexible) hardness. AS40 requires degassing for best results.
CS25 is an easy-to-use condensation cure (also known as tin cure) RTV silicone rubber suitable for the production of silicone moulds.
It cures opaque grey to a 25 shore A (soft flexible) hardness.
This special thixotropic additive adds like a thickening agent for addition cure silicone rubber, such as our AS40.
The additive can be used to turn liquid RTV silicone rubber to into a thick, brushable silicone that can be used to make glove moulds or re-usable silicone vacuum bags.
In this section of our catalogue you will find most of our 'liquid' products, including resins, gelcoats, silicones and adhesives. Our range includes resins for a wide range of applications including laminating, infusion, casting and coating as well as silicones suitable for making moulds and components and engineering adhesives for structural assembly.