In this section of our catalogue you will find all of our composite reinforcement materials, including dry reinforcements and prepregs. Our range of reinforcements includes woven fabrics, multiaxials and unidirectional material. We also stock narrow width woven and unidirectional tapes, woven flat braids and woven tubular sleeve.
This complete starter kit has been put together as a convenient means for individuals and independent manufacturers to get started with the prepreg composites manufacturing process.
The kit includes all vacuum bagging consumables, fittings and accessories, along with starter quantities of the XPREG® XC110 out-of-autoclave carbon fibre prepregs.
The surface ply for our XPREG® XC110 out-of-autoclave prepreg carbon fibre system. This is an uncured prepreg material and requires an oven or autoclave to cure it.
This 210gsm 3k prepreg uses a 2x2 twill weave for the classic carbon fibre appearance and excellent drape characteristics. It can be used on its own, in one or more plies, or together with a heavier backing ply for thicker laminates.
Lighter 3k surface ply for our XPREG® XC130 autoclave-cure prepreg carbon fibre system. This is an uncured prepreg material and requires an oven or autoclave to cure it.
This 210gsm 3k reinforcement uses a high strength TR30S fibre for maximum performance and 2x2 twill weave for excellent drape characteristics. It can be used on its own, in one or more plies, or together with a heavier backing ply for thicker laminates.
The backing ply for our XPREG® XC130 autoclave-cure prepreg carbon fibre system. This is an uncured prepreg material and requires an oven or autoclave to cure it.
This 450gsm 12k reinforcement uses a high strength TR50S fibre for maximum performance and 2x2 twill weave for excellent drape characteristics. It can be used on its own, in one or more plies, or together with lighter surface ply for the best possible surface finish.
Surface ply for our XT135 out-of-autoclave prepreg carbon fibre tooling system. This is an uncured prepreg material and requires an oven or autoclave to cure it.
This prepreg reinforcement is 1.25m (1250mm) wide and sold in a choice of prepacked roll lengths.
Backing ply for our XT135 out-of-autoclave prepreg carbon fibre tooling system. This is an uncured prepreg material and requires an oven or autoclave to cure it.
This prepreg reinforcement is 1.25m (1250mm) wide and sold in a choice of prepacked roll lengths.
High performance 150gsm oven-cure prepreg adhesive film used for bonding honeycomb cores, such as aluminium and Nomex, and structural foams, such as Rohacell into composite laminate structures.
This adhesive film is 1.25m (1250mm) wide and available to buy in choice of pre-packed roll lengths.
Unidirectional reinforcement using our XPREG® XC130 resin system but 100% compatible with our XC110 system. This is an uncured prepreg material and requires an oven or autoclave to cure it.
This 300gsm UD reinforcement is used to add maximum possible strength in a specific direction. It can be used on its own or combined with woven reinforcements.
The backing ply for our XPREG® XC110 out-of-autoclave prepreg carbon fibre system. This is an uncured prepreg material and requires an oven or autoclave to cure it.
This 416gsm 6k prepreg uses a 2x2 twill weave for the classic carbon fibre appearance and excellent drape characteristics. It can be used on its own, in one or more plies, or together with lighter surface ply for the best possible surface finish.
In this section of our catalogue you will find all of our composite reinforcement materials, including dry reinforcements and prepregs. Our range of reinforcements includes woven fabrics, multiaxials and unidirectional material. We also stock narrow width woven and unidirectional tapes, woven flat braids and woven tubular sleeve.
Easy Composites' famous Black Stuff is our budget grade of carbon fibre fabric. At around half the typical price of a cloth of this specification, Black Stuff is the best value carbon fibre fabric you can buy.
The low price of this product is made possible by huge (container load) buying power and less stringent manufacturing tollerances than our standard product lines but for less demanding applications Black Stuff still offers a great combination of performance and appearance.
Incredibly light 1k plain weave carbon fibre cloth used in applications requiring the thinnest, lightest carbon fibre reinforcement including aero-modelling, UAVs, jewellery-making, fishing pole and bike frame repairs.
1m wide. Sold by the linear metre or in packaged 'mini rolls'.
Plain weave 240gsm, 3k woven carbon tape suitable for localised reinforcement, seam joining, wrapping and winding when used together with a suitable resin system, such as epoxy.
Available in 25mm (1") and 50mm (2") widths, sold by the linear metre.
Unidirectional carbon fibre tape/ribbon to add high strength localised unidirectional reinforcement.
Heavier weight 12k carbon fibre tow suitable for local joint reinforcement or filament winding. The tow itself is a premium quality high strength fibre with a general purpose sizing suitable for all resin systems.
Sold in short reels or full (factory package) spools.
High quality carbon/Kevlar® fabric reinforcement woven from high-strength TR30S 3k carbon and genuine Kevlar® yarn. This 210gsm cloth uses a 2x2 twill weave for excellent drapability.
This carbon/aramid hybrid reinforcement is used to add strength, stiffness and impact/abrasion protection to laminates in applications such as canoes, kayaks and motorsport seats, panels and more.
210gsm carbon/Twaron® hybrid reinforcement fabric offers virtually the same properties as carbon/Kevlar® but without the bright yellow colour of Kevlar fibre, providing a more subtle appearance without compromising on performance.
This fabric is available in 1.2m (1200mm) width and sold by the linear metre.
Decorative carbon fibre hybrid fabric made by interweaving genuine 3k carbon fibre with eye-catching blue polyester yarns to produce a black and blue carbon fibre appearance.
1m wide, sold by the linear metre.
Premium quality 160gsm spread-tow carbon fibre fabric with 15mm wide carbon 'tows' arraged in a 2x2 twill pattern, creating the classic herringbone appearance of carbon fibre but in a much larger pattern.
Spread-tow fabrics provide an extremely smooth, flat finish and being 'non-crimp' they offer excellent mechanical performance too.
In this section of our catalogue you will find all of our composite reinforcement materials, including dry reinforcements and prepregs. Our range of reinforcements includes woven fabrics, multiaxials and unidirectional material. We also stock narrow width woven and unidirectional tapes, woven flat braids and woven tubular sleeve.
Traditional fibreglass chopped strand mat (CSM) with emulsion binder for use with polyester and vinylester resins.
Emulsion bound chopped strand mat (CSM) commonly used as reinforcement in fibreglass (GRP) parts and in pattern or mould making.
High quality, super-lightweight woven glass cloth/fabric reinforcement suitable for a range of uses including aero modelling, boat building, surf/snow/kite board building, pattern making and more.
This dry cloth is compatible with all resin systems and laminating methods. 1m wide, sold by the linear metre.
High quality, lightweight woven glass cloth/fabric reinforcement suitable for a range of uses including aero modelling, boat building, surf/snow/kite board building, pattern making and more.
This dry cloth is compatible with all resin systems and laminating methods. 1m wide, sold by the linear metre.
High quality, general purpose woven glass cloth/fabric reinforcement suitable for a range of uses including boat building, recreational equipment, pattern and mould making and more.
This dry cloth is compatible with all resin systems and laminating methods, including resin infusion. 1m wide, sold by the linear metre.
Traditional 'woven roving' low-cost woven glass reinforcement for general fibreglassing. Woven roving makes a good alternative to chopped strand mat (CSM)
1m wide. Sold by the linear metre or in full box quantities.
Extremely light weight 25g plain weave glass fibre reinforcement used for ultra-light applications such as wing skins or as a scrim cloth on balsa or other lightweight materials.
Compatible with all resin systems and lamination methods. 1m wide, sold by the linear metre.
High quality 30gsm glass surface tissue from Owens Corning. Often used as a print blocker for hand layup fibreglass or used on the 'open face' side
1m wide, sold by the linear metre.
Lightweight 320gsm +/-45° biaxial glass reinforcement used to add off-axis stiffness to GRP moulds and components.
This multi-axial reinforcement is made up of two layers of non-crimp unidirectional glass fibre, one at +45° and the other at -45° and can be used on its own on more commonly in conjunction with other weights or weaves of reinforcement to create the optimum laminate.
Middleweight 440gsm +/-45° biaxial glass reinforcement used to add off-axis stiffness to GRP moulds and components.
This multi-axial reinforcement is made up of two layers of non-crimp unidirectional glass fibre, one at +45° and the other at -45° and can be used on its own on more commonly in conjunction with other weights or weaves of reinforcement to create the optimum laminate.
Heavyweight 600gsm +/-45° biaxial glass reinforcement used to add off-axis stiffness to GRP moulds and components.
This multi-axial reinforcement is made up of two layers of non-crimp unidirectional glass fibre, one at +45° and the other at -45° and can be used on its own on more commonly in conjunction with other weights or weaves of reinforcement to create the optimum laminate.
290gsm woven glass reinforcement in a classic 2x2 twill weave which as been aluminium coated to create a unique appearance, similar to silver carbon fibre.
This dry glass cloth is compatible with all resin systems and can be used for skinning/overlaying, hand laminating and resin infusion.
300gsm chopped strand mat glass reinforcement using a powder binder. Because the powder binder breaks down physically, rather than by a solvent in the resin, powder-bound CSM can be used with solvent-free resins, such as epoxy.
950mm wide. Sold by the linear metre or in full box quantities.
Lightweight 100gsm chopped strand mat (CSM) using an emulsion binder for use with polyester and vinylester resins.
This 100g mat is the reinforcement recommended for the coupling coat layer in our Uni-Mould system. 1m wide, sold by the linear metre.
In this section of our catalogue you will find all of our composite reinforcement materials, including dry reinforcements and prepregs. Our range of reinforcements includes woven fabrics, multiaxials and unidirectional material. We also stock narrow width woven and unidirectional tapes, woven flat braids and woven tubular sleeve.
Made 100% from genuine Dupont® Kevlar® fibre, this thick 400gsm Kevlar® protective fleece fabric can be stitched into garments such as motorcycle clothing, luggage or equipment to add protection from a range of threats including knife slash, heat and road abrasion.
This heavyweight fleece is our thickest form of Kevlar protection and offers the maximum protection, although it is thicker, heavier and warmer than the alternatives.
Made from black high solids rubber reinforced with genuine Dupont® Kevlar® fibre, this rubber-like protective patch material can be used to add durable rip-stop protection to a range of garments (such as ski-pants), luggage or equipment.
This thin, flexible 375gsm material is fully waterproof and cut be stitched or bonded into place.
Made 100% from genuine Dupont® Kevlar® fibre this 375gsm loopbacked Kevlar® protective fabric can be stitched into garments such as motorcyle clothing, t-shirts, luggage or equipment to add protection from a range of threats including knife slash, heat and road abrasion.
This terry towel-like fabric is quite stretchy and offers a good level of protection without being too thick, making it well suited to lining lighter garments like t-shirts.
Made 100% from genuine Dupont® Kevlar® fibre, this thin 175gsm Kevlar® protective felt material can be stitched into garments such as motorcycle clothing, luggage or equipment to add protection from a range of threats including knife slash, heat and road abrasion.
This lightweight non-woven felt is our thinnest form of Kevlar protection but therefore offers reduced protection compared with our thicker/heavier alternatives.
High quality 175gsm woven Kevlar® fabric reinforcement using genuine Dupont® Kevlar® yarn in a satin weave for good drapabily.
This high performance aramid cloth can be used on its own to make panels with maximum impact strength or used in combination to add impact strength to carbon or glass fibre laminates in applications such as motorsport panels, canoes, kayaks etc.
High quality carbon/Kevlar® fabric reinforcement woven from high-strength TR30S 3k carbon and genuine Kevlar® yarn. This 210gsm cloth uses a 2x2 twill weave for excellent drapability.
This carbon/aramid hybrid reinforcement is used to add strength, stiffness and impact/abrasion protection to laminates in applications such as canoes, kayaks and motorsport seats, panels and more.
High quality carbon/Kevlar® fabric reinforcement woven from high-strength TR30S 3k carbon and genuine Kevlar® yarn.
This 188gsm carbon/aramid hybrid reinforcement uses a distrinctive plain weave pattern and is used to add strength, stiffness and impact/abrasion protection to laminates in applications such as canoes, kayaks and motorsports components.
Diolen is a high tenacity polyester fibre with excellent impact and abrasion properties making it a popular choice for use in high impact applications like life rafts, canoes, kayaks etc, usually in combination with glass fibre reinforcement.
This 200gsm cloth is woven from a special black Diolen fibre, in a classic 2x2 twill weave for excellent drape and conformability;.
210gsm carbon/Twaron® hybrid reinforcement fabric offers virtually the same properties as carbon/Kevlar® but without the bright yellow colour of Kevlar fibre, providing a more subtle appearance without compromising on performance.
The black Twaron fibre is also more UV stable than Kevlar and won't discolour in sunlight like Kevlar will making this fabric a fantastic choice for outdoor equipment like canoes and kayaks.
Diolen is a low-cost, high tenacity polyester fibre with excellent impact and abrasion properties making it a popular choice for use in high impact applications, such as canoes, kayaks and life rafts.
This natural colour, plain weave 300gsm cloth would typically be used in conjunction with glass fibre reinforcement as a cost-effective way to add impact and abrasion strength to a laminate.
High quality 300gsm woven Kevlar® fabric reinforcement using genuine Dupont® Kevlar® yarn in a 2x2 twill weave for good drapabily
This fabric is 1m (1000mm) wide and sold by the linear metre.
Medium duty (40 tex) Kevlar sewing thread suitable for a wide range of applications where a very strong thread is required with exceptional heat, chemical and abrasions resistance.
Recommended for sewing or stitching our Kevlar protective textiles.
High quality aramid flat braid in a 32mm width. This 400gsm narrow woven aramid braid is often used as seam-tape on kayaks but can be used in a variety of applications where a high strength or abrasion resistant composite reinforcement is required.
This braid is sold by the linear metre.